Product Features
Up to 622Mbps data links
80Km with 9/125µm SMF *1
1490nm 1550nm FP or DFB laser *1
Simplex LC Connector
Hot-pluggable SFP footprint
Single 3. 3V power supply
Operating temperature: - 40ºC to 85ºC *1
RoHS
P/N end by "D" with DDM support
Applications
√ SDH STM 4, SONET OC-12
√ FAST ETHERNET
*1
| PART NUMBER |
WAVE LENGTH TX/RX |
DISTANCE |
LASER |
TEMPERATURE |
| PGSFP62BD141580D |
1490/1550nm |
80Km |
DFB/PIN |
COM 0~70ºC |
| PGSFP62BD151480D |
1550/1490nm |
80Km |
DFB/PIN |
COM 0~70ºC |
1. Product Description
The PGSFP62BDxxxx80D/I series SFPs are small form factor pluggable (SFP) transceivers compatible with multi-sourcing agreement (MSA). It is suitable for single-mode fiber (SMF) communications in Fast Ethernet and SDH STM 4, SONET OC-12.
2. Regulatory Compliance
PIOGOODS transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.
3. Absolute Maximum Ratings
| Parameter |
Symbol |
Min. |
Max. |
Unit |
| Supply Voltage |
VCC |
-0.5 |
3.6 |
V |
| Storage Temperature |
TS |
-40 |
85 |
°C |
| Operating Case Temperature |
TC |
0 |
70 |
°C |
4. Recommended Operating Conditions
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Operating Case Temperature |
TC |
0 |
|
70 |
°C |
| Power Supply Voltage |
VCC |
3.15 |
3.3 |
3.45 |
V |
| Power Supply Current |
ICC |
|
|
300 |
mA |
| Data Rate |
|
|
622 |
|
MBps |
| Max Link Length on 9/125µm SMF |
Lmax |
80Km |
5. Optical Characteristics
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Transmitter |
Centre Wavelength
PGSFP62BD141580D |
λc |
1450 |
1490 |
1530 |
nm |
Centre Wavelength
PGSFP62BD151480D |
λc |
1500 |
1550 |
1580 |
nm |
| Spectral Width (RMS) |
σ |
|
|
4 |
nm |
| Average Output Power |
Pout |
-1 |
|
5 |
dBm |
| Extinction Ratio |
EX |
9 |
|
|
dB |
| Optical Rise/Fall Time |
tr/tf |
|
|
2 |
ns |
| Receiver |
| Centre Wavelength |
λc |
1260 |
|
1600 |
nm |
| Receiver Sensitivity |
PIN |
|
|
-31 |
dBm |
| Receiver Overload |
PMAX |
5 |
|
|
dBm |
| LOS De-Assert |
LOSD |
|
|
-37 |
dBm |
| LOS Assert |
LOSA |
-40 |
|
|
dBm |
| LOS Hysteresis |
|
0.5 |
|
4.5 |
dB |
6. Electrical Characteristics
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Transmitter |
| Input Differential Impedance |
Zin |
90 |
100 |
110 |
Ω |
| Data Input Swing Differential |
Vin |
500 |
|
2400 |
mV |
| Tx-Dis Disable |
Vd |
2.0 |
|
Vcc |
V |
| Tx-Dis Enable |
Ven |
0 |
|
0.8 |
V |
| TX-Fault (Fault) |
|
2.0 |
|
Vcc+0.3 |
V |
| TX-Fault (Normal) |
|
0 |
|
0.8 |
V |
| Receiver |
| Data Output Swing Differential |
Vout |
370 |
|
2000 |
mV |
| Rx-Los Fault |
Vlf |
2.0 |
|
Vcc+0.3 |
V |
| Rx-Los Normal |
Vln |
0 |
|
0+0.8 |
V |
7. Pin Descriptions
| Pin |
Symbol |
Description |
Ref. |
| 1 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
6.1 |
| 2 |
TFAULT |
Transmitter Fault. Not supported. |
|
| 3 |
TDIS |
Transmitter Disable. Laser output disabled on high or open. |
6.2 |
| 4 |
MOD_DEF(2) |
Module Definition 2. Data line for Serial ID. |
6.3 |
| 5 |
MOD_DEF(1) |
Module Definition 1. Clock line for Serial ID. |
6.3 |
| 6 |
MOD_DEF(0) |
Module Definition 0. Grounded within the module. |
6.3 |
| 7 |
Rate Select |
No connection required |
|
| 8 |
LOS |
Loss of Signal indication. Logic 0 indicates normal operation. |
6.4 |
| 9 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
6.1 |
| 10 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
6.1 |
| 11 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
6.1 |
| 12 |
RD- |
Receiver Inverted DATA out. AC Coupled. |
|
| 13 |
RD+ |
Receiver Non-inverted DATA out. AC Coupled. |
|
| 14 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
6.1 |
| 15 |
VCCR |
Receiver Power Supply |
|
| 16 |
VCCT |
Transmitter Power Supply |
|
| 17 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
6.1 |
| 18 |
TD+ |
Transmitter Non-Inverted DATA in. AC Coupled. |
|
| 19 |
TD- |
Transmitter Inverted DATA in. AC Coupled. |
|
| 20 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
6.1 |
Notes:
6.1 Circuit ground is internally isolated from chassis ground.
6.2 Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
6.3 Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
6.4 LOS is open collector output. Should be pulled up with 4.7k -10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
8. EEPROM & DDM THRESHOLD
8.1 EEPROM
2 wire address 1010000X (A0h)
0~95
Serial ID Defined by SFP MSA (96 bytes) |
96~127
Vendor Speific (32 bytes) |
128~255
Reserved (128 bytes) |
8.2 DDM THRESHOLD
PGSFP62BD141580D
PGSFP62BD151480D
| |
Low Alarm |
Low Warn |
High Warn |
High Alarm |
| Temp |
-5ºC |
0ºC |
70ºC |
75ºC |
| Voltage |
3V |
3.1V |
3.5V |
3.6V |
| Tx Bias |
15mA |
20mA |
40mA |
45mA |
| Tx Power |
-5dBm |
-4dBm |
5dBm |
6dBm |
| Rx Power |
-35dBm |
-34dBm |
5dBm |
6dBm |
9. Recommend Circuit
10. Mechanical Specifications
11. LABEL
PIOGOODS offers label OEM design and print.
Label barcode supports code128 and 2D barcode
SIZE: 30mm * 9mm
Ordering Information
| Part No. |
Data Rate |
DDM |
Wave |
Fiber Type |
Dist. |
Temp. |
Optical Interface |
| PGSFP62BD141580D |
622Mbps |
yes |
1490nm
1550nm |
SMF |
80Km |
0~70ºC |
BiDi LC |
| PGSFP62BD151480D |
622Mbps |
yes |
1550nm
1490nm |
SMF |
80Km |
0~70ºC |
BiDi LC |
VERSION UPDATE:
| VERSION NO. |
DATE |
UPDATED INFORMATION |
| V20131010 |
20131010 |
- EEPROM& DDM Threshold updated
- "LABEL" added
- Ordering information updated
- Product picture updated
|
| V20160815 |
20160815 |
1. More items added into list |
NOTICE:
PIOGOODS reserves the right to make changes to this product in this specification without notice, in order to improve product performance.
Shenzhen Pioneergoods Communication Co., Ltd., established in 2009 and located in Shenzhen,specializes in R&D, production, sales, and technical services for fiber telecom equipment and FTTH solutions. As a leading pro-vider in China, we offer two main product lines:Opticl Fiber Cable: Armored Fiber Optic cable/Duct Fiber Optic cable/Aerial Fiber optic Cable/Direct Buried Fiber Optic cable/Figure 8 Fiber Optic cable/Underwater Fiber Optic cable/ADSS Fiber Optic cableOptical cable installation hardware: Profession-al hardware for indoor and outdoor installation of optical cable, to provide you with a full range of solutions to install optical cable.We prioritize quality, im-plementing a comprehensive control svstem to ensure all products meet the highest standards. From raw materials to delivery, our professional team oversees every step to guarantee excellence. Trusted by global clients like Belden, STC, and Telefonica, we also provide OEM services tailored to cus-tomer needs.At POGOODS, we value customer satisfaction, fostering inno-vation, quality, and efficiency. Choose us for reliable solutions and mutual success.
Q1: Wonder if you accept small orders?
Al: Do not worry. Feel free to contact us .in order to get more orders andgive our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. lf you do not have your own ship forwarder, we can help you.
Q3: Can you do OEM for me?
A3: We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.
Q4: What's your payment terms ?
A4: By T/T,LC AT SIGHT,30% deposit in advance, balance 70% before shipment.
Q5: How can l place the order?
A5: First sign the Pl,pay deposit,then we will arrange the production.Afterfinished production need you pay balance. Finally we will ship the Goods.
Q6: When can l get the quotation ?
A6: We usually quote you within 24 hours after we get your inquiry. lf youare very urgent to get the quotation,Please call us or tell us in your mail, so that we could regard your inquiry priority.
Audited Supplier 
){kind=link}