16g FC 1310nm 10km SFP Transceiver

• Customization: Available
• Certification: CE, ISO, RoHS
• Condition: New
• Model NO.: PGSFP16GLR
• Transport Package: Carton Box
• Trademark: PIOGOODS
• Origin: China
• Production Capacity: 2000PCS/Month

Product Description

 

Product Description

 

 

 Product Features

Up to 14.025 Gb/s bi-directional data links

Hot-pluggable SFP+ footprint

Built-in digital diagnostic functions

1310nm DFB laser transmitter

Duplex LC connector

RoHS compliant and Lead Free

Up to 10 km on 9/1250m SMF

Metal enclosure, for lower EMI

1W maximum power consumption with established link

Single 3.3V power supply

Operating temperature range: 0°C to 70°C

Applications
√  Tri Rate 4.25 / 8.5 / 14.025 Gb/s Fibre Channel through Rate Select
√  10GBASE-LR/LW 10G Ethernet


1. Product Description
The PGSFP16GLR SFP+ transceivers are designed for use in Fibre Channel links up to 14.025 Gb/s data rate and up to 10 km link length.  They are compliant with FC-PI-5 Rev. 6.101 and SFF-8472 Rev 11.03, and compatible with SFF-84322 and applicable portions of SFF-8431 Rev. 3.04.  The optical transceivers are compliant per the RoHS Directive 2011/65/EU.

2. Regulatory Compliance
PIOGOODS transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.

3. Absolute Maximum Ratings

Parameter	Symbol	Min.	Max.	Unit
Supply Voltage	VCC	-0.5	4	V
Storage Temperature	TS	-40	85	°C
Operating Case Temperature	TC	0	70	°C

4. Recommended Operating Conditions

Parameter	Symbol	Min.	Typical	Max.	Unit
Operating Case Temperature	TC	0		70	°C
Power Supply Voltage	VCC	3.15	3.3	3.45	V
Power Supply Current	ICC			300	mA
Data Rate		4.25		14.025	GBps
Max Link Length on 9/125µm SMF	Lmax			10	km

5. Optical Characteristics

Parameter	Symbol	Min.	Typical	Max.	Unit	Note
Transmitter
Centre Wavelength	λc	1295	1310	1325	nm	1,2
Spectral Width (-20dB)	σ			1	nm	3
Output Opt. Power, 14.025 Gb/s	PO,RH	-5.0		+2.0	dBm	4
Output Opt. Power, 4.25, 8.5 Gb/s	PO,RL	-5.0		-1.0	dBm	4,5
Optical Modulation Amplitude, 14.025 Gb/s	OMA	631			mW	6
Optical Modulation Amplitude, 4.25, 8.5 Gb/s	OMA	290			mW	4,6
Transmitter and Dispersion Penalty, 14.025 Gb/s	TDP			4.4	dB	7
Transmitter and Dispersion Penalty, 8.5 Gb/s	TDP			3.2	dB	7
Optical Rise/Fall Time, 4.25 Gb/s	tr/ tf			90	ps	8
RIN				-130	dB/Hz
Receiver
Unstressed Receiver OMA Sensitivity, 14.025 Gb/s	RSENSr			0.063	mW
Unstressed Receiver OMA Sensitivity, 8.5 Gb/s	RSENSr			0.042	mW	9
Unstressed Receiver OMA Sensitivity, 4.25 Gb/s	RSENS4			0.029	mW	9
Average Received Power	RxMAX			+2.0	dBm
Optical Center Wavelength		1260		1370	nm
Return Loss		12			dB
LOS De-Assert	LOSD			-19	dBm
LOS Assert	LOSA	-30			dBm
LOS Hysteresis		0.5			dB

Notes:
1. Class 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 regulations.
2. High Bandwidth Mode. Class 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 regulations.
3. Low Bandwidth Mode. Class 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 regulations.
4. Also specified to meet curves in FC-PI-5 Rev 6.101 Figures 23, 24, and 25, which allow trade-off between wavelength, spectral width and OMA for 4.25 and 8.5 Gb/s operation.
5. 20dB spectral width.
6. Equivalent extinction ratio specification for Fibre Channel. Allows smaller ER at higher average power.
7. For 14.025 and 8.5 Gb/s operation, Jitter values for gamma T and gamma R are controlled by TDP.
8. Unfiltered, 20-80%. Complies with IEEE 802.3 (Gig. E), FC 4x eye masks when filtered.
9. Measured with PRBS 27 -1 at 10-12 BER.
 

1. Electrical Characteristics

Parameter	Symbol	Min.	Typical	Max.	Unit
Transmitter
Input Differential Impedance	Zin	90	100	110	Ω
Data Input Swing Differential	Vin	90		800	mV
Tx-Dis Disable	Vd	2.0		Vcc	V
Tx-Dis Enable	Ven	0		0.8	V
Output rise and fall time	Tr, Tf			90	ps
Receiver
Data Output Swing Differential	Vout	185		425	mV
Rx-Los Fault	Vlf	2.0		VccHOST	V
Rx-Los Normal	Vln	0		0+0.8	V

7. Pin Descriptions

Pin	Symbol	Description	Ref.
1	VEET	Transmitter Ground  (Common with Receiver Ground)	7.1
2	TFAULT	Transmitter Fault. Not supported.
3	TDIS	Transmitter Disable. Laser output disabled on high or open.	7.2
4	MOD_DEF(2)	Module Definition 2. Data line for Serial ID.	7.3
5	MOD_DEF(1)	Module Definition 1. Clock line for Serial ID.	7.3
6	MOD_DEF(0)	Module Definition 0. Grounded within the module.	7.3
7	RS0	Rx Rate Select: Open or Low = High =   8.5 or 4.25 Gb/s Fibre Channel (Low Bandwidth) 14.025 Gb/s Fibre Channel (High Bandwidth)
8	LOS	Loss of Signal indication.  Logic 0 indicates normal operation.	7.4
9	RS1	Tx Rate Select: Open or Low = High =   8.5 or 4.25 Gb/s Fibre Channel (Low Bandwidth) 14.025 Gb/s Fibre Channel (High Bandwidth)
10	VEER	Receiver Ground  (Common with Transmitter Ground)	7.1
11	VEER	Receiver Ground  (Common with Transmitter Ground)	7.1
12	RD-	Receiver Inverted DATA out.  AC Coupled.
13	RD+	Receiver Non-inverted DATA out.  AC Coupled.
14	VEER	Receiver Ground  (Common with Transmitter Ground)	7.1
15	VCCR	Receiver Power Supply
16	VCCT	Transmitter Power Supply
17	VEET	Transmitter Ground  (Common with Receiver Ground)	7.1
18	TD+	Transmitter Non-Inverted DATA in.  AC Coupled.
19	TD-	Transmitter Inverted DATA in.  AC Coupled.
20	VEET	Transmitter Ground  (Common with Receiver Ground)	7.1

Notes:
7.1 Circuit ground is internally isolated from chassis ground.
7.2 Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
7.3 Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
7.4 LOS is open collector output.  Should be pulled up with 4.7k -10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.

8. EEPROM & DDM THRESHOLD
8.1 EEPROM
2 wire address 1010000X (A0h)
 

0~95
Serial ID Defined by SFP MSA (96 bytes)

96~127
Vendor Speific (32 bytes)

128~255
Reserved (128 bytes)

8.1 DDM THRESHOLD

PGSFP16GLR
 

	Low Alarm	Low Warn	High Warn	High Alarm
Temperature	-5ºC	0ºC	70ºC	75ºC
Voltage	3.0V	3.1V	3.5V	3.6V
Tx Bias	15mA	20mA	90mA	100mA
Tx Power	-6dBm	-5dBm	2dBm	3dBm
Rx Power	-23dBm	-22dBm	1dBm	2dBm

9. Mechanical Specifications


10. LABEL
PIONEERGOODS offers label OEM design and print.
Label barcode supports code128 and 2D barcode
SIZE: 1) Front 35mm*10.5mm   2)Back 26mm*10.5mm

Ordering Information

Part No.	Data Rate	DDM	Wave	Fiber Type	Dist.	Temp.	Optical Interface
PGSFP16GLR	16G FC	yes	1310nm	SMF	10km	0~70ºC	LC

VERSION UPDATE:

VERSION NO.	DATE	UPDATED INFORMATION
V20170818	20170818	EEPROM& DDM Threshold updated "LABEL" added Ordering information updated Product picture updated

Shenzhen Pioneergoods Communication Co., Ltd., established in 2009 and located in Shenzhen,specializes in R&D, production, sales, and technical services for fiber telecom equipment and FTTH solutions. As a leading pro-vider in China, we offer two main product lines:Opticl Fiber Cable: Armored Fiber Optic cable/Duct Fiber Optic cable/Aerial Fiber optic Cable/Direct Buried Fiber Optic cable/Figure 8 Fiber Optic cable/Underwater Fiber Optic cable/ADSS Fiber Optic cableOptical cable installation hardware: Profession-al hardware for indoor and outdoor installation of optical cable, to provide you with a full range of solutions to install optical cable.We prioritize quality, im-plementing a comprehensive control svstem to ensure all products meet the highest standards. From raw materials to delivery, our professional team oversees every step to guarantee excellence. Trusted by global clients like Belden, STC, and Telefonica, we also provide OEM services tailored to cus-tomer needs.At POGOODS, we value customer satisfaction, fostering inno-vation, quality, and efficiency. Choose us for reliable solutions and mutual success.




Q1: Wonder if you accept small orders?
Al: Do not worry. Feel free to contact us .in order to get more orders andgive our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. lf you do not have your own ship forwarder, we can help you.

Q3: Can you do OEM for me?
A3: We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.

Q4: What's your payment terms ?
A4: By T/T,LC AT SIGHT,30% deposit in advance, balance 70% before shipment.

Q5: How can l place the order?
A5: First sign the Pl,pay deposit,then we will arrange the production.Afterfinished production need you pay balance. Finally we will ship the Goods.

Q6: When can l get the quotation ?
A6: We usually quote you within 24 hours after we get your inquiry. lf youare very urgent to get the quotation,Please call us or tell us in your mail, so that we could regard your inquiry priority.