| Customization: | Available |
|---|---|
| Certification: | CE, ISO, RoHS |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Technical item | Details |
PON Interface |
1 GPON BoB(Bosa on Board) |
| Receiving sensitivity: ≤-27dBm | |
| Transmitting optical power: 0~+5dBm | |
| Transmission distance: 20KM | |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/APC Connector |
| Chip Spec | RTL9607C DDR3 256MB |
| Flash | 1Gbit SPI NAND Flash |
| LAN Interface | 4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
Wireless |
Compliant with IEEE802.11b/g/n, ac |
| 2.4G Operating frequency:2.400-2.4835GHz | |
| 5.8G Operating frequency:5.150-5.825GHz | |
| 2.4G 2*2 MIMO, rate up to 300Mbps | |
| 5.8G 2*2 MIMO, rate up to 867Mbps | |
| 4 external antennas 5dBi | |
| Support Multiple SSID | |
CATV Interface |
RF, WDM, optical power: +2~-15dBm |
| Optical reflection loss: ≥45dB | |
| Optical receiving wavelength: 1550±10nm | |
| RF frequency range: 47~1000MHz, RF output impedance: 75Ω | |
| RF output level: 78dBuV | |
| AGC range: -13~+1dBm | |
| MER: ≥32dB@-15dBm | |
| USB | Standard USB2.0 |
| LED | 11 LED, For Status of PWR ,LOS,PON,LAN1~LAN4 ,2.4G,5.8G Worn , Normal(CATV) |
| Push-Button | 2 For Function of Factory Reset and WPS |
| Operating Condition | Temperature: 0ºC~+50ºC |
| Humidity: 10%~90%(non-condensing) | |
| Storing Condition | Temperature: -30ºC~+60ºC |
| Humidity: 10%~90%(non-condensing) | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 289mm×164mm×40mm(L×W×H) |
| Net Weight | 0.35Kg |
| Pilot Lamp | Status | Description |
PWR |
On | The device is powered up. |
| Off | The device is powered down. | |
LOS |
Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
PON |
On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
LAN1~LAN4 |
On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
2.4G |
On | 2.4G WIFI interface up |
| Blink | 2.4G WIFI is sending or/and receiving data (ACT). | |
| Off | 2.4G WIFI interface down | |
5.8G |
On | 5G WIFI interface up |
| Blink | 5G WIFI is sending or/and receiving data (ACT). | |
| Off | 5G WIFI interface down | |
| Worn (CATV) |
On | Input optical power is higher than 3dbm or lower than -15dbm |
| Off | Input optical power is between -15dbm and 3dbm | |
| Normal (CATV) |
On | Input optical power is between -15dbm and 3dbm |
| Off | Input optical power is higher than 3dbm or lower than -15dbm |
Shenzhen Pioneergoods Communication Co., Ltd., established in 2009 and located in Shenzhen,specializes in R&D, production, sales, and technical services for fiber telecom equipment and FTTH solutions. As a leading pro-vider in China, we offer two main product lines:Opticl Fiber Cable: Armored Fiber Optic cable/Duct Fiber Optic cable/Aerial Fiber optic Cable/Direct Buried Fiber Optic cable/Figure 8 Fiber Optic cable/Underwater Fiber Optic cable/ADSS Fiber Optic cableOptical cable installation hardware: Profession-al hardware for indoor and outdoor installation of optical cable, to provide you with a full range of solutions to install optical cable.We prioritize quality, im-plementing a comprehensive control svstem to ensure all products meet the highest standards. From raw materials to delivery, our professional team oversees every step to guarantee excellence. Trusted by global clients like Belden, STC, and Telefonica, we also provide OEM services tailored to cus-tomer needs.At POGOODS, we value customer satisfaction, fostering inno-vation, quality, and efficiency. Choose us for reliable solutions and mutual success.
){kind=link}