Durable ABS Optic Splice Closure 432 Core High Pressure Resistance

• Customization: Available
• Type: FTTX Solutions
• Certification: CE, ISO, RoHS
• Model NO.: PG-FOSC-HJ0924
• Condition: New
• Optical Fiber Winding Radius: ≥40mm
• Weight: 4.7kg
• Transport Package: Carton
• Specification: 465 × 250× 240mm
• Trademark: PIOGOODS
• Origin: Guangdong, China
• Production Capacity: 5000 Set/Sets Per Month

Product Description

 

PG-FOSC-HJ0924 Optic Fiber Splice Closure

 

Application
The product can be applied in the straight line and branch line     (one into two, one into three)connections of optical cables within the diameter of 22mm(φ), all types and structures, when laid overhead ,in    the pipeline,
underground or in the well. Meanwhile, it is also applied to the connection of all-plastic city phone cables.

Structural features:
u All property indexes are in accordance with National YD/T814-1996 Standard.
u The case body is made from imported high-intensity engineering plastics(ABS) and formed the shape with    mould plastics under high pressure. It is in the shape of HALF rectangle, with the advantages of less weight, high mechanical intensity, corrosive-resistance, anti-thunderstruck and long service life.
u The body is sealed with silicon rubber, the cable entrance uses silicon block,reliable sealing,easy to open and maintain.
u 4 in 4 out,max capacity 432cores(single fibers)
u Optional cable loop(Φ7 ,Φ14,Φ20 )enables user to choose different outer diameter according to actual conditions, It enhances the reliability of the cable entrance sealed.
u overlapping fiber-melting tray and separate insulation earth unit make the disposition of the cores, expanding the capacity and cable-earthen flexible, convenient and safe.
u outer metal component and fixing unit are made of stainless steel, so can be repeatedly used in different environments.
 

 

Main technical Specifications:

External Size	465 × 250× 240mm(432 cores)
Weight	4.7kg
Optical fiber winding radius	>40mm
Extra loss of fiber tray	<0.01dB
Fiber length left in tray	>1.6m
Fiber capacity	24cores, tape-shaped:432cores
Working temperature	- 40 ~+70C
Lateral pressure-resistance	>2000N /10cm

 
Operations
u Choose the cable loop with proper outer diameter and let it go through the optical cable. Peel the cable , take off the outer and inner housing, as well as loose contract tube, and washoff the filling grease, leaving

1.1~1.6mfiber and 30~50mm steel core.
u Fix the cable pressing card and cable, together with cable reinforce steel core. If the diameter of the cable is less than the diameter of cable loop, first bind the cable fixing point with adhesive tape till the diameter is    enough, then fix it.
u Lead the fiber into the melting and connecting tray, fix heat contract tube and heat melt tube to one of the    connecting fiber. After melting and connecting the fiber, move heat contract tube and heat melt tube and fix the stainless (or quartz)reinforce core stick ,make sure the connecting point is in the middle of the housing   pipe. Heat the pipe to make the two into one. Put the protected joint into the fiber-laying tray.(one tray can   lay 24cores)
u Lay the left fiber in the melting and connecting tray evenly, and fix the winding fiber with nylon ties. Use the trays from the bottom up. After all the fiber has been connected, cover the top layer and fix it.
u Position it and use the earth wire in accordance with the project plan.
u Sealing the cable retainer nearing the inlet of splice closure and the joint of the cable rings with sealing tape. And close the unused inlets with plugs, with exposed concave parts of the plug sealed with tapes.     Then put sealing trips into the sealing groove on the sides of the shell and grease the concave part of inlet of the body  between the two parts of the shell. Then close the two parts of the shell and tighten it with stainless steel
bolts. The bolts should be screwed tightly with balanced force.
u According to the laying requirement, position and fix the hanging tool .

 

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: Can you do OEM for me?
A3: We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.

Q4: What's your payment terms ?
A4: By T/T,LC AT SIGHT,30% deposit in advance, balance 70% before shipment.

Q5: How can I place the order?
A5: First sign the PI,pay deposit,then we will arrange the production.After finished production need you pay balance. Finally we will ship the Goods.

Q6: When can I get the quotation ?
A6: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.