Dual Band 180ombps Long Range Access Point 4 Antenna 802.11ax Network WiFi Wireless 5grouter WiFi6

• Customization: Available
• Transfer Rate: 10/100/1000Mbps
• Firewall: Firewall
• Ports: 8
• Application: Home,Office
• Network: WCDMA
• LAN Ports: 3
• Protocols: Ipv4 Ipv6
• Single Gross Weight: 1.500kg
• Encryption Type: Wpa2-Psk,Wpa2
• Selling Units: Single Item
• Packaging Details: Carton Box
• with Modem Function: No
• 5g Wi-Fi: 1300Mbps
• Transport Package: Carton Box
• Specification: 35X28X8. cm
• Trademark: piogoods
• Origin: China
• Production Capacity: 5000000 Pieces/Year

Product Description

AX1800 Dual Band 1800Mbps Long Range Access Point 4 Antenna 802.11ax Network Wifi Wireless 5g router wifi6

 

Brief overview

This document describes the electrical characteristics, RF performance, dimensions and application environment of the PG-WF2101XA.Under the introduction of this document, end users or developers can quickly understand the hardware functions of PG-WF2101XA.

PG-WF2101XA is a WIFI6 home CPE router. It accesses the Internet through 1000Mbps WAN port, and then shares the Internet network
through wireless WiFi 6 and 1000Mbps wired LAN.

Reference standards

Relevant standard specifications:
USB3.0/USB2.0 bus standard
PCI- Express bus standard
IEEE802.11n/g/b/a/ac/ax
IEEE802.3/802.3u/802.ab

Main features of the product

Using MT7621A scheme, MIPS dual-core CPU, the main frequency is up to 880MHZ
Using independent WIFI6 chip, MT7905D and MT7975D, the rate is up to 1800Mbps
Using high-speed 256MB DDR3, with 16MB Nor Flash
1WAN+3LAN 1000M adaptive network port, support auto flip (Auto MDI/MDIX)..
Support "one-key flashing mode", that is, long press the reset button to enter the rescue flashing mode...
External high-gain WIFI antenna, wireless signal 360 degrees without dead angle

Hardware function

Introduction to the hardware interface

Ports	WAN* 1, 1000Mbps(Auto MDI/MDIX) IEEE 802.3/802.3u/802.ab
		LAN*3, 1000Mbps(Auto MDI/MDIX) IEEE 802.3/802.3u/802.ab
Power adapter	DC5.0*2.1MM slot
Button	Reset button* 1, MESH button*1
Antennas	Onmidirectional External 5dbi 2.4G antennas*2
		Onmidirectional External 5dbi 5.8G antennas*2

Introduction to indicator lights

MESH LED	1. The red light is on during the boot process, the boot is complete, the red light is off and the green light is on 2. Press the mesh button to enter the mesh pairing state, the green light flashes once a second, and the other lights are off 3. The main equipment network is normal, the green light and blue light are on at the same time (cyan) The slave device MESH is successfully connected, and the distance is longer, the green light and the red light are on at the same time (orange), the distance is suitable for the green light and the blue light is on at the same time (cyan)
WAN LED	When connecting the WAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
LAN1 LED	When connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
LAN2 LED	When connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
LAN3 LED	When connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
POWR LED	when the power supply is normal, the power indicator is always on, and it won't be on when the power supply is abnormal.

Introduction to the hardware platform

Processor	MT7621A MIPS Dual Core CPU, 880MHZ main frequency
WIFI chipset	MT7905D+MT7975D IEEE 802.11n/g/b/a/ac/ax, max speed up to 1800Mbps
RAM	DDR3 256MB
Flash	Nor Flash 16MB
		NAND Flash

Introduction to hardware watchdog function

This hardware product is designed with a hardware watchdog function. The hardware watchdog will automatically turn on after power-on, and detect the heartbeat level output by the routing system that jumps once per second. If the routing system itself fails (such as a crash), it will also Naturally, the heartbeat level can no longer be output. At this time, if the hardware watchdog does not detect the heartbeat level within 120 seconds, it will shut down itself for 15 seconds and then restart the entire system.

Hardware watchdog specific functions
Routing system is abnormal	Module dialing abnormal
Restart the whole system	Only restart the module

Introduction to WIFI wireless parameters

1. WIFI EVM standard

 

2. WIFI 2.4G

Compatible with IEEE 802.11 b/g/n/ac/ax, supports 20MHz, 40MHz, modulation method 1024-QAM / OFDMA, adopts 2T2R MU-MIMO antenna technology, and the highest connection rate is up to 573.5Mbps. The following is an explanation of 2.4G WIFI's power frequency,receiving sensitivity, and transmitting power.

 

3. WIFI 5.8G

Compatible with IEEE 802.11 a/ac/ax, supports 20MHz, 40MHz, 80MHz, modulation method 1024-QAM / OFDMA, adopts 2T2R MU-MIMO antenna technology, and the highest connection rate is up to 1201Mbps. The following is an explanation of the power frequency, receiving
sensitivity, and transmitting power of 5.8G WIFI.

 

Q: Our company needs to customize optical fiber equipment with special specifications. Can you provide customized services?

A: Yes, we have a professional customization team that can provide customized services according to your specific needs, including specifications, length, connector type, etc.
Q: Does your company's fiber optic equipment comply with international standards?
A: Yes, our fiber optic equipment complies with industry-related international standards and is of high quality and reliability to meet your business needs.
Q: We would like to know your company's product life cycle and after-sales service policy.
A: Our products have a long life cycle, and we provide a full range of after-sales services, including technical support, repair.
Q: Can you provide the performance parameters and technical specifications of the product?
A: Of course, we can provide detailed product specification sheets, including performance parameters, technical specifications and other related information to help you better understand our products.
Q: Does your company have an independent quality control team?
A: Yes, we have a dedicated quality control team to ensure that each batch of products undergoes strict testing and quality control to ensure product consistency and reliability.
Q: We need large quantities of fiber optic equipment in our project, do you offer bulk discounts?
A: Yes, we offer competitive volume discounts for bulk orders, and we can also provide personalized solutions to meet your project needs.
Q: Can you provide reference cases of your company's previous successful projects?
A: Of course, we can provide reference cases of past successful projects to prove our experience and excellent service in the industry.
Q: We are interested in your company's products, can we request samples for testing?
A: Yes, we welcome your request for sample testing to ensure our products meet your expectations