Factory Price Brand Compatible 85onm 300m Distance Multimode Optical Modules SFP 10g SFP SFP-10g-Sr

Product Description

Factory price Brand compatible 850nm 300m distance  multimode Optical modules sfp 10G SFP SFP-10G-SR

 

 

1. Product Description:
The PG-SFPP8510GSR is a 10Gbps enhanced small form factor pluggable SFP+ transceiver compatible with 10GBASE-SR/SW. It is suitable for multi-mode fiber (MMF) communications in 10Gbps Ethernet.

 

Install or replace a multimode LC port on your Gigabit fiber networking equipment with Piogoods's PGSFPP8510GSR 10Gbase-SR SFP Transceiver. Compatible with many others brand routers and switches, the PGSFPP8510GSR is a budget-friendly solution for linking Gigabit Ethernet switches in a fiber optic network. It complies with SFP multi-source agreement (MSA) standards and its electrical interface is compliant with SFF-8431. This 10Gbase-SR transceiver supports data transfer rates up to 11.1 Gbps. Note: The PGSFPP8510GSR is sensitive to static and requires proper handling. Use an anti-static ESD Wrist Strap or similar device when handling the transceiver module.

 

Functionally Equivalent of SFP-10G-SR, Hot-Pluggable & Premium Features The PGSFPP8510GSR is functionally equivalent to others brand transceiver SFP-10G-SR and is manufactured to meet or exceed their specifications. You can use the PGSFPP8510GSR with a wide variety of their networking hardware and it will deliver the same performance as the SFP-10G-SR.

A hot-pluggable input and output allow you to install the PGSFPP8510GSR without interrupting your network. Just plug the SFP end of the transceiver into the SFP port on your network switch. The other end has a duplex LC connector to use with multimode fiber cable.

 

The PGSFPP8510GSR has an 850nm wavelength vertical-cavity surface-emitting laser (VCSEL). It transmits a distance of 300 meters using 10Gb duplex multimode 50/125 LC fiber cable . The PGSFPP8510GSR also supports digital diagnostics monitoring (DDM), providing you with the ability to monitor optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.

 

2. Regulatory Compliance:
PIOGOODS transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.

 

3. Product Features :
Up to 10Gbps data links
300m with 50/125µm 2000MHz MMF
850nm VCSEL laser
Duplex LC Connector
Hot-pluggable SFP+ footprint
Single 3. 3V power supply
Operating temperature: 0 to 70
RoHS
Digital Diagnostic Monitor(DDM)
Power Consumption < 0.8W

 

4. Applications:
10GBase-SR/SW 10G Ethernet

 

 

5. Absolute Maximum Ratings

 

Parameter	Symbol	Min.	Max.	Unit
Supply Voltage	VCC	-0.5	4	V
Storage Temperature	TS	-40	85	°C
Operating Case Temperature	TC	0	70	°C

 

6.Recommended Operating Conditions:

Parameter	Symbol	Min.	Typical	Max.	Unit
Operating Case Temperature	TC	0		70	°C
Power Supply Voltage	VCC	3.15	3.3	3.45	V
Power Supply Current	ICC			200	mA
Data Rate			10		GBps
Max Link Length on 50/125µm 2000MHz MMF	Lmax			300	m

 

7. Optical Characteristics

Parameter	Symbol	Min.	Typical	Max.	Unit
Transmitter
Centre Wavelength	λc	840	850	860	nm
Spectral Width (RMS)	σ			0.5	nm
Average Output Power	Pout	-5		0	dBm
Extinction Ratio	ER	3.5			dB
Average Launch Power of Off Transmitter	Poff			-30	dBm
Receiver
Centre Wavelength	λc	840	850	860	nm
Receiver Sensitivity	PIN			-13	dBm
Receiver Overload	Pmax	0.5			dBm
LOS De-Assert	LOSD			-16	dBm
LOS Assert	LOSA	-18			dBm
LOS Hysteresis		0.5			dB

 

 

 Just for you:

 

 

FAQ

Q: Our company needs to customize optical fiber equipment with special specifications. Can you provide customized services?

A: Yes, we have a professional customization team that can provide customized services according to your specific needs, including specifications, length, connector type, etc.
Q: Does your company's fiber optic equipment comply with international standards?
A: Yes, our fiber optic equipment complies with industry-related international standards and is of high quality and reliability to meet your business needs.
Q: We would like to know your company's product life cycle and after-sales service policy.
A: Our products have a long life cycle, and we provide a full range of after-sales services, including technical support, repair.
Q: Can you provide the performance parameters and technical specifications of the product?
A: Of course, we can provide detailed product specification sheets, including performance parameters, technical specifications and other related information to help you better understand our products.
Q: Does your company have an independent quality control team?
A: Yes, we have a dedicated quality control team to ensure that each batch of products undergoes strict testing and quality control to ensure product consistency and reliability.
Q: We need large quantities of fiber optic equipment in our project, do you offer bulk discounts?
A: Yes, we offer competitive volume discounts for bulk orders, and we can also provide personalized solutions to meet your project needs.
Q: Can you provide reference cases of your company's previous successful projects?
A: Of course, we can provide reference cases of past successful projects to prove our experience and excellent service in the industry.
Q: We are interested in your company's products, can we request samples for testing?
A: Yes, we welcome your request for sample testing to ensure our products meet your expectations